ZCS Azzurro Hybrid Inverter Three-phase HYD 15000W ZSS 2MPPT ZZT-HYD15.0-3PH

Advantages:

• Automatic management of energy flows from PV, battery and grid
• Integrated on-board energy meter
• Parallelable
• Possibility of operation in zero feed-in mode
• Unit compatible with high voltage lithium battery (200-750V)
• Stand Alone support mode, ensures continuity of operation and stand-alone operation, both from photovoltaic source and battery, in case of power failure
  
   

Features:

 

DC input technical data (photovoltaic):

• Typical DC Power 22500W
• Maximum DC Power for each MPPT 11250W (450V-850V)
• N. Independent MPPTs/No. strings per MPPT 2/2
• Maximum input voltage 1000V
• Trigger voltage 250V
• Nominal input voltage 600V
• MPPT range of DC voltage 180V-960V
• DC voltage range at full load 350V-850V
• Maximum input current for each MPPT 25A/25A
• Maximum absolute current for each MPPT 30A/30A
  
   

Battery connection technical data:

• Compatible battery type Lithium-ion (supplied by Zucchetti)
• Allowable voltage range 180V-750V
• Number of independent battery channels 2 HV battery channels (configurable as independent or in parallel)
• Maximum charging/discharging power 15000W
• Allowable temperature range -10°C/+50°C
• Maximum charging current per battery channel 25A (35A peak for 60s)
• Maximum discharge current per battery channel 25A (35A peak for 60s)
• Charge curve Managed by battery BMS
• Depth of discharge (DoD) 0%-90% (programmable)
  
   

AC output (grid side):

• Rated power 15000W
• Maximum power 16500VA
• Maximum current 24A
• Connection type/Nominal voltage Three-phase 3/N/PE, 220/380, 230/400
• AC voltage range 184V~276V (in accordance with local standards)
• Rated frequency 50Hz/60Hz
• AC frequency range 45Hz~55Hz / 55Hz~65Hz (in accordance with local standards)
• Total harmonic distortion <3%
• Power factor 1 default (programmable +/- 0.8)
• Feed-in limitation Programmable from display
  
   

EPS (Emergency Power Supply) output:

• Power output in EPS 15000W
• Peak apparent power in EPS 22000VA for 60s
• EPS output voltage and frequency Three-phase 230V/400V 50Hz
• Current deliverable in EPS (peak) 24A (32A for 60s)
• Total harmonic distortion 3%
• Switch time <20ms
  
   

Efficiency:

• Maximum efficiency 98.2%
• PEA efficiency (EURO) 97.7%
• MPPT efficiency 99.9%
• Maximum battery charge/discharge efficiency 97.8%
• Stand-by consumption <15W
  
   

Protections:

• Safety protections Anti islanding, RCMU, Ground Fault monitoring.
• DC reverse polarity protection yes
• Integrated DC disconnect switch
• Overheating protection yes
• Overvoltage Category/Type of Protection Overvoltage Category III / Protective class I
• Integrated AC/DC Dischargers MOV: Type 2 standard
• Output overcurrent protection yes
• Soft Start Battery yes
  
   

Standard:

• EMC EN61000-1, EN61000-3
• Safety standards IEC62109-1, IEC62109-2, NB-T32004/IEC62040-1
• Grid connection standards Certificates and connection standards available at www.zcsazzurro.com
  
   

Communication:

• Wi-Fi/4G/Ethernet communication interfaces (optional not integrated)
• RS485 (proprietary protocol) integrated,
• USB , CAN 2.0 (for battery connection), Bluetooth integrated
• Other inputs RS485 line for external meters (up to 4 meters connectable), 6 digital inputs (5V TTL), direct sensor connection (CT)
  
   

General Data:

• Allowable ambient temperature range -30~60 °C
• Transformerless topology
• Environmental protection rating IP65
• Allowable relative humidity range 0~100%
• Maximum operating altitude 4000m
• Noise level <45 dB @ 1m
• Weight 37Kg
• Cooling Forced convection
• Dimensions (H*W*D) 515mm*571mm*264mm
• LED display and APP display
• Warranty 10 years