• Fracarro IF-IF central control unit 4 Satellite + 1 TV inputs and 2 taps 1OUT 271138

Fracarro IF-IF central control unit 4 Satellite + 1 TV inputs and 2 taps 1OUT 271138

€292.80
Tax included

Fracarro IF-IF central unit model SCD2-32IF SSA 4 inputs Satellite and 2 derivatives 1OUT with the following features:

  • Supply voltage: 220-240 Vac
  • Frequency: 50/60 Hz
  • Inputs: 4 Satellite + 1 TV
  • Outputs: 1 Satellite + TV
  • Derivatives: 1 (Satellite, TV)
  • Number MUX output: 32
  • Compact IF-IF control unit to convert up to 32 DVB-S/S2 transponders with SCD2 (dCSS) technology
  • Total Satellite output 127dBuV
  • Satellite gain adjustment 20dB
  • Satellite slope adjustment 15dB

Interested in this product? Drop us an email and we will let you know when it's available for order.

  Politiche per la sicurezza

(modificale nel modulo Rassicurazioni cliente)

  Politiche per le spedizioni

(modificale nel modulo Rassicurazioni cliente)

  Politiche per i resi

(modificale nel modulo Rassicurazioni cliente)

Advantages:

  • SCD2-32IF SSA: 4 Satellite inputs, 1 passive TV input and 1 mixed derivative with: total Satellite 127dBuV output level; sockets up to 150 meters from the headend can be served; Satellite 20dB gain adjustment and Satellite 15dB slope adjustment
  • Automatic Gain Control (CAG): maintains adequate output level even when input transponder power varies (from 55dBuV to 85dBuV)
  • Compatible with both traditional LNB (UX-QT LTE) and Wideband type LNB (UX-WB LTE) to handle the 4 polarities of a satellite with only two cables
  • LED monitoring of: operation of the part, connection to the USB port, correct power on of the product and presence of tele-power and of the possible presence of input short circuit
  • In isofrequency configuration; the product can also be used to equalize and amplify an entire satellite polarity
  • Fixed (IF-IF) or Dynamic modes (by driving them from the DiSEqC controls of the SCR or SCD2 decoder)
  • Configurable slope of the generated signal (up to 8dB, adding to the 15dB in the SCD2-32IF SSA model) so as to compensate for cable loss in distribution
  • Dual power ports to be able to offer greater robustness to the system
  • Compact size, especially when compared to that of an equivalent IF-IF central unit with 32 programmable filters
  • Free PC configuration SW on the site, to define through the USB port: the input, output frequencies and other configuration parameters of the central unit (level, tilt, ...).


Features:


Power consumption:

  • Power supply voltage Vac/Hz 220-240, 50-60
  • Power plug 2 with F connectors (the second one is optional, only serves to give more robustness to the piece power supply)
  • Power consumption without LNB mA 600, 12
  • Absorption with LNB mA 1200, 12
  • Maximum SAT line current mA 600 @12V

Derivative:

  • MUX number output 32
  • Mode of operation IF-IF Static / SCR / SCD2 (dCSS)
  • Bandwidth SAT MHz 950-2150
  • Bandwidth per mux SAT MHz 20-60
  • SAT frequency accuracy KHz < 50
  • DiSEqC-SCIF 1st and 2nd generation switching standards (SCD / SCD2) SCR (EN50494) and SCD2 (EN50607)

TV:

  • TV bandwidth MHz 114-790
  • TV pass-through loss dB -2


SAT:

  • SAT bandwidth MHz 250-2350
  • Gain adjustment dB 20
  • SAT slope adjustment dB 15
  • Slope adjustment for MUX dB 8 (via SW)
  • CAG dynamics dBµV 55-85
  • Max SAT output level dBuV 112
  • Max SAT tone output level 107
  • Maximum SAT input level dBuV 97
  • Maximum SAT output level dBuV 127

General characteristics:

  • Power supply dimensions 145x120x70 mm
  • Working temperature °C -10/+55
  • Dimensions mm 200x110x30
  • SAT-SAT isolation dB >35
  • TV SAT isolation dB >25

  • Brand
  • Reference
    FRA 271138
  • EAN13
    8016978099764

  • Type
    Front panels
  • Version
    5IN/1OUT
  • Model
    20db

Comments (0)

No customer reviews for the moment.

16 other products in the same category

Viewed products

Loading...