Dab FEKA 600 MA submersible hydraulic pump for wastewater 60190343H

DAB's Feka 600 are submersible pumps suitable for draining and lifting clear wastewater and stormwater in domestic and residential settings. The pumps have been redesigned to mark 40 years on the market, making them even more reliable, durable and ergonomic in use. The technopolymer set-back impeller allows solids up to 25 mm to pass through.

Feka 600 are suitable for fixed or mobile installations and are available in automatic versions with built-in float switch or in manual versions without float switch. The pump body and suction grid are made of technopolymer, the motor shaft of stainless steel. They can also be used for emptying tanks, tubs or cisterns even in the presence of solids (up to 25 mm) such as leaves or other small impurities. They are also suitable for draining flooded basements, cellars and garages or for preventing flooding when installed in rainwater sumps, which can also be used as portable pumps in emergency situations to drain water from flooded rooms in the presence of mud leaves or debris. Built-in thermal protection in all single-phase versions. Possibility of dry operation up to 1 minute.

Features:

• Maximum head: 7.5 m
• Maximum immersion depth: 7 meters with appropriate cable length
• Type of liquid pumped: wastewater, sewage and rainwater
• Free passage: 25 mm
• Minimum suction level: 38 mm
• Min. and max. supported liquid temperature: +0°C to +35°C for domestic use - +0°C to +50° C for other uses
• Motor degree of protection: IP68
• Motor insulation class: F
• Impeller(s) material of construction: technopolymer
• Single-phase power supply: 230V 50 Hz
• Possible type of installation: stationary or portable in vertical position
• Pump body and suction grid made of technopolymer. Triple ring seal in oil bath
  
  
  

Motor construction features:

• Submersible motor of asynchronous type with continuous duty. Stator inserted in a stainless steel hermetic enclosure and rotor mounted on oversized ball bearings. Built-in thermal protection in all single-phase versions. AISI 304 stainless steel motor and AISI 431 steel shaft for increased resistance to corrosive attack.