Mareco Saturno diffuser with E27 connection Black 1033101N

Features:

• Outdoor residential for use on Ø60mm overhead poles (IP65), for straight mounting
• Body and cap made of black paste-colored PC (polycarbonate)
• Diffuser with screw coupling, made of translucent PMMA (acrylic) with etched effect, connected to the lamp holder compartment by black polycarbonate fitting and sealed with pure neutral silicone adhesive, anti-mold low elastic modulus with excellent resistance to aging, weathering and UV rays
• Black PC (polycarbonate) lamp holder compartment
• AISI 301 harmonic steel pole retaining spring
• Polyester powder coating with special pre-treatment for outdoor use (Phosphochromation) in order to ensure high resistance to atmospheric agents
• Silicone gasket
• A2 stainless steel hardware
• Fixed-position fluorescent light source
• Rotosymmetrical illuminance
• Lamp socket E27 max 10W FBT, mains voltage 220-240V 50-60Hz
• Maximum lamp size Ø60xL110mm
• Equipped with PG9 plastic cable gland with osmotic valve for air leakage (limits overpressure) and humidity
• Connection to the power supply line can be made via H05RN-F 2x0.75mmq cable preconnected at the outlet of the luminaire (35cm)
• Fixing by harmonic steel expansion spring
• Routine maintenance by unscrewing the diffuser with screw connection (E27)
• Routine and extraordinary maintenance on Led wiring not required
• IP68 "T"-shaped branch terminal block cannot be housed inside the Ø60mm pole
• Circular section diffuser Ø200mm
• Product dimensions 320x200mm diameter
  
  

Mechanical properties silicone, cured 7 days at 22°C and 50% relative humidity:

• Hardness, Shore A 37
• Tensile strength MPa 2.5
• Elongation at break %680