Hager Disconnect Switch 25A 4 Poles 400VAc 2 Modules SBN425

Features:

• Control type Disconnect switch
• Neutral position without neutral
• Poles 4 P
• Type of poles 4 P
• Rated operating voltage AC 400 V
• Rated frequency 50/60 Hz
• Rated insulation voltage 440 V
• Type of input voltage 1 AC
• Rated fault holding current 4000 V
• Rated current in AC21 in category B 25 A
• Rated current in AC22 in category A 25 A
• Rated current in A 25 A
• Breaking capacity 1 second Icw 0.375 kA
• Thermal current in free air 25 A
• Rated current in AC21 in category A 25 A
• Rated current in AC22 in category B 25 A
• Rated short-circuit closing capacity Icm at 415 V AC according to IEC 60947-3 529 A
• Frequency (ETIM numerical value range) 50 to 60 Hz
• Total power dissipation 3.6 W
• Power dissipation per pole 0.9 W
• Duty cycle. AC21 rated load electr. dur. 25000
• Cycle oper. AC22 rated load electr. dur. 25000
• Number of operations (mechanical duration) 200000
• Depth of the installed product 68 mm
• Height of the installed product 83 mm
• Width of installed product 35 mm
• Tightening torque 1.8Nm
• Minimum cross-section with flexible cable 1.5 / 10mm²
• Minimum cross-section with rigid cable 1.5 / 16mm²
• Position of misaligned terminals
• Type of screw connection
• Quantity of NO contacts 4
• Standards, Approvals Text IEC 60947-3, IEC/EN 60669-2, IEC/EN 60669-4
• European WEEE Directive concerned
• Enclosure degree of protection IP20
• Operating temperature -2050 °C
• Pollution degree/IEC60664/IEC60947-2 2
• Altitude 2000m
• Storage/transport temperature -40/+80 °C