Siemens PROFINET Interface Module IM 155-6PN 6ES71556AU010BN0

Features:

• I&M data Yes; I&M0 ... I&M3
• Replacing a module during operation (Hot Swapping) Yes Single Hot Swapping
• Operation with clock synchronism No
• STEP 7 TIA Portal can be designed/integrated from version V14 onwards
• STEP 7 plannable/integrated from version V5.5 SP4 onwards
• PROFINET from version GSD/revision GSD V2.3 / -
• via Si data set
• Nominal value (DC) 24 V
• Permissible range, lower limit (DC) 19.2 V
• Permissible range, upper limit (DC) 28.8 V
• Reverse polarity protection Yes
• Short-circuit protection Yes
• Mains/voltage interruption buffer time 10ms
• Current consumption (nominal value) 450 mA
• Current consumption, max. 550 mA
• Switch-on current, max. 3.7 A
• Power supply in the backplane bus 4.5 W
• Power loss, typ. 1,9 W
• Addressing space per module, max. 256 bytes; per input/output
• Addressing space per station, max. 512 bytes; dependent on design
• Max. number of ET 200SP modules that can be used 32
• Max. number of ET 200AL modules that can be used 16
• Number of submodules per station, max. 256
• Number of PROFINET interfaces 1; 2 ports (switch).

Interface Physics

• Number of ports 2
• Integrated switch Yes
• BusAdapter (PROFINET) Yes; Usable BusAdapter: BA 2x RJ45, BA 2x FC, BA 2x M12.

Protocols:

• PROFINET IO-Device Yes
• Open IE communication Yes
• Transmission media redundancy Yes; PROFINET MRP.

Physical RJ 45 interface (Ethernet):

• 100 Mbit/s full-duplex (100BASE-TX) PROFINET transmission method.
• 100 Mbit/s Yes; 100 Mbit/s full-duplex (100BASE-TX) PROFINET
• Autonegotiation Yes
• Autocrossing Yes