Diverter connected Vimar Arke View Wireless 19592.0

The connected electronic diverter mechanism allows you to control a load via the on-board push button, via a wireless connection and from a traditional remote push button. The device has the possibility to be controlled with two different radio standards (exclusive between them); Bluetooth mesh (default) or Zigbee (settable through View Wirelles app). The Bluetooth mesh network implies the presence of the 20597-19597-14597 gateway while a Zigbee gateway (e.g. Amazon Echo Plus, Echo Show or Echo Studio) is required for dialogue via Zigbee.

The device is equipped with:

• 2 interlocked relay outputs for realizing diverter function
• Front button for controlling the connected load.

Automatically opens the relays for thermal protection.

The electronic diverter can be connected to existing wired inverted/diverter outputs to make the load function "connected".

The electronic deviator must be powered with the same L and N that power the load. In case of installation with wired diverters/invertersters, the electronic diverter must be connected in such a way that it is always powered and therefore installed in place of the wired diverter furthest from the load.

Characteristics:

• Rated supply voltage: 100-240 V~, 50/60 Hz
• Power dissipation: 0,55 W
• Transmitted RF power: < 100mW (20dBm)
• Frequency Range: 2400-2483.5 MHz
• Terminals: - 2 terminals (L and N) for line and neutral - 1 terminal (P) for connection to the wired remote control (e.g. art. 20008-19008-16080-14008). The maximum distance between the IoT device and the push-button is 50 m with a minimum section cable of 1.5 mm2 - 2 terminals (1 and 2) for the diverter output
• Front button used both for load control and as configuration button
• RGB LED that indicates the status of the load (settable from the View Wireless App) and the status of the configuration (flashing blue)
• In Bluetooth technology mode, up to 2 radio devices (art. 03925) can be associated with the device, allowing the control of the actuator or the activation of a scenario
• Operating temperature: -10 ÷ +40 °C (for indoor use)
• Degree of protection: IP20.