Edimax Gigabit PoE+ IEEE 30W 1GBE Splitter GP-101ST

The GP-101ST Gigabit PoE (Power over Ethernet) Splitter provides both data and power to non-PoE Fast Ethernet or Gigabit Ethernet enabled products such as network cameras and wireless access points, using an Ethernet cable and without the use of power outlets and electrical cords. Ideal for remote locations, the GP-101ST Splitter enables data transfer between PSE (Power Source Equipment) and GP-101ST at up to Gigabit speeds and provides power output voltages of 12V, 9V, or 5V DC simultaneously for up to 100 meters (328 feet). The GP-101ST Splitter is easy to install and requires no tools or software, while offering the benefits of cost savings as well as flexible network planning and high reliability.

The GP-101ST Splitter supports 802.3at/af and proprietary PoE, ensuring compatibility with other 802.3at/af PoE/proprietary-compliant injectors and switches. The GP-101ST Splitter is easy to install and requires no tools or software configuration. Connect the GP-101ST to any power supply device such as a PoE injector or PoE switch to provide power to Ethernet devices. The GP-101ST offers small and medium-sized businesses a complete end-to-end PoE solution.

The GP-101ST supports 802.3at/af ensuring compatibility with other 802.3af compliant PoE injectors or PoE switches. Taking advantage of the convenience of PoE, the GP-101ST eliminates the need and cost of placing an Ethernet-enabled device such as a wireless access point or network camera near a network outlet or using power cables. For flexible network deployment options, the compact-sized GP-101ST can be mounted on a ceiling or wall up to 100 meters (328 feet) from a power source.

The GP-101ST features PoE short-circuit protection to protect network devices and supports 5V, 9V or 12V DC output with a built-in slide switch to select the power output based on the requirements of the network device.

Features:

HARDWARE

• Ports 1 RJ-45 10/100/1000 port
• Base-T as PoE input port - 1 RJ-45 10/100/1000 port
• Base-T as output port - 1 DC port as jack output port
• 5V/9V/12V, Power and AC LED indicators
• Power Input IEEE 802.3af, IEEE 802.3at
• Power Adjustable slide switch DC output for 5V/2A, 9V/2A or 12V/2A DC
• DC output power - Y-cable DC pins (ODxIDxL): 5.5 x 2.1 x 9.5mm and 3.5 x 1.35 x 11mm
• Pin assignment 1/2(+), 3/6(-) End-Span (Mode A) or 4/5(+), 7/8(-) Mids-Span (Mode B)
• Dimensions (W x D x H) 63 × 64 × 23 mm
• Weight 65g.

CONTENTS IN THE PACKAGE:

• PoE+ Slitter GP-101ST
• One DC Y-Cable
• Quick Installation Guide.