Lugs Cembre non-insulated for copper conductors nominal section of conductor 70mmq screw diameter 10 A14-M10
Politiche per la sicurezza
(modificale nel modulo Rassicurazioni cliente)
Politiche per le spedizioni
(modificale nel modulo Rassicurazioni cliente)
Politiche per i resi
(modificale nel modulo Rassicurazioni cliente)
The cable lugs of series A-M are made from tube, copper electrolytic section such as to ensure a good electrical connection that an adequate resistance to traction. Are annealed and protected on the surface by tinning electrolyte.
Are made from tube of electrolytic copper Cu-OF CW008A according to the UNI EN 13600.
The annealing process optimizes the structural features of the material, which allows a compression easier and ensures the use of the lug in the presence of mechanical stresses of various nature.
The collar is provided with chamfer and hole inspection, for easy and correct introduction of the conductor; its length is also such as to make easy and precise placement within the matrix of the tool.
Each lug contains engraved:
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent