Vemer twilight motion detector 1 module Silver VE765200

It captures movements occurring within its range and activates for the set period of time and only if the brightness level falls below the preset threshold, the connected load (e.g., the lighting system). Time and brightness level can be set via the two controllers on the front of the device. Sens IR is small and compact for discreet installation in any room of the house due to its small footprint. It comes with adapters that allow it to be installed with the plates of the main civil series.

 

• Detects movements within its range and activates for the set period of time and only if the brightness level is below the set threshold, the lighting system
• Sets how long the load should remain on, sets the brightness level below which to activate the load in case of motion detection.
• With zero crossing technology to increase contact life and better electrical performance.
  
   

The adapters inside the package allow mounting of the following plates:

• ABB MYLOS SERIES
• AVE S44 SERIES
• BTICINO AXOLUTE/AXOLUTE AIR
• BTICINO LIGHT/LIVING INTERNATIONAL/LIVING LIGHT (LL)
• BTICINO LIVINGLIGHT AIR
• BTICINO MATIX
• GEWISS CHORUS
• VIMAR ARKE SERIES
• VIMAR EIKON SERIES
• VIMAR EIKON EVO SERIES
• VIMAR PLANA SERIES
  
  
  
   

Technical Specifications:

• 230V AC power supply
• Frequency: 50/60Hz
• Absorption: 5VA - 1Watt
• Fixing: recessed
• Maximum wire section: 1.5mm2
• Output: 1 relay normally open
• Relay contact rating at 250Vac: 5 ( on resistive load)
• Tripping time 30 seconds ÷ 15 minutes
• Tripping range: lux 5-100
• Detection angle 110° at 20°C
• Sensing range: 7 meters at 20°C
• Operating temperature: 0/+35
• Storage temperature: -10/+60°C
• Flush mounting
• Operating humidity: 20-90% non-condensing
• Degree of protection IP40 (on Front)
• Complies with EU Community Directives

Please note: the package does not include a plate, bracket or side caps.

The package includes 8 transparent adapters for the most common switch ranges.