Bticino Intercom Kit CLASSE 100A16E 2-Wire Single-Family 364232

Other information:

• Name tag lighting with white LED.
• Can be wall-mounted and flush-mounted with specific accessories: (350020) flush-mount box plus (343061) flush-mount accessory to be purchased separately
• Can be accessorized with rain roof (343051) to be purchased separately
• The handset meets IP54 protection rating, IK10 strength rating, Recommended installation height 160-165cm
• The intercom has 2 physical keys for controlling the main intercom functions call answering and closing and 3 touch keys for controlling the main functions lock opening, stair light control and door station/clocking activation plus 4 additional configurable touch keys that take on different functions e.g. intercom, additional lock activation, general activations
• Ringer volume adjustment (with call mute) via special selector switch
• Installation can be done off-wall with special bracket or via accessory table stand (1 x 344692) to be purchased separately
• The device, which also has a professional studio function, must be configured
  
  
   

Power supply specifications:

• 110-240 Vac power supply
• Frequency: 50/60 Hz
• Provides a low voltage output rating of 26 Vdc and a maximum current rating of 600 mA and is protected on the PRI side (with fuse) against overload and short circuit
• It is a double-isolation SELV safety device.
  
   

PRI (AC power input):

• Rated voltage: 110 - 240 Vac
• Rated current: 370 - 225 mA
• Working voltage range: 100 - 265 V
• Working frequency range: 47 - 63 Hz
• Power consumption at full load: 20.5 W
• Power dissipation: 4.9 W (max.)
• Efficiency at full load: 80 % (typ.)
• Standby power: < 1 W
• Operating temperature: -5 /+45 °C
• Integrated fuse (PRI SIDE): F1 T2A 250 V (NOT REPLACEABLE)
• Overall dimensions: 6 DIN modules
   
• Reference standards: CEI EN60950 - CEI 64-8-4
  
   

BUS (DC output):

• Rated voltage: 26V
• Rated current: 0 - 0.6 A
• Rated power: 15.6 W
  
  
   

Installation Comply with the following installation rules:

• The power supply unit must always be installed in appropriate enclosures.
• It must not be exposed to dripping or splashing water
• Do not obstruct ventilation openings
• A double-pole switch with contact separation of at least 3 mm must be used, placed near the power supply. The switch has the dual purpose of being able to disconnect the power supply from the mains and to protect the power supply