Fischer 1K manual polyurethane foam 750 ml 00009285

Manual Universal Polyurethane Foam for construction is a one-component, CFC-free, self-extruding, ready-to-use polyurethane product. The polyurethane foam contains propellants that are not harmful to the ozone layer. Colour Straw yellow Drying time Dust dry after 20-25 min. (+20°C 65% RH) . Hardening speed 1,5 h for 30 mm of bead (+20°C 65% Ur) Shrinkage None Post-expansion None, volume developed up to 45 litres.

 

PRODUCT CHARACTERISTICS:

• Ready to use
• Self-extruding manual
• Suitable for joining
• Filling and insulating
• Excellent adhesion to most substrates (except PE, PP and Teflon)
• Excellent volume yield
• Excellent stability
• No shrinkage
• High insulating capacity
• Two sizes available: 500 ml and 750 ml
  
   

APPLICATION:

• Sealing to achieve good acoustic and thermal insulation
• Fixing insulation panels such as polystyrene, extruded polystyrene, cork, etc.
• Fixing and reinforcing plasterboard panels, partition walls, false ceilings, etc.
• Sealing of penetration holes
• Sealing of manhole rings and covers
  
   

WAY OF APPLICATION:

• The substrate must be clean, free of dust, oil and grease.
• To obtain a perfect polymerisation and better adhesion it is necessary to moisten the substrate and the applied foam.
• The best foam yield results will be obtained with canisters at a temperature of approximately +20°C.
• Shake the can well before use (20 to 30 times).
• Dose the foam using the nozzle
• Apply from top to bottom