Siemens contactor 3 poles 7A S00 1NA 24VCA 3RT20151AB01

The contactor is a device for closing and opening electrical circuits, mostly high voltage, by remote control.

The standard CEI 17-3 defines a contactor (contactor) as a device capable of interrupting or establishing current within a circuit. To do this, the device opens and closes the contact channels between the system and the power supply structure. In short, a kind of switch to be used for every eventuality.

Features:

• Siemens Series
• Control supply voltage (Low voltage) 24Vca
• Max admissible voltage for safe separation between coil and main contacts 400 Vac
• Impulse withstand voltage of main circuit nominal value 6 kV -of auxiliary circuit nominal value 6 kV
• Operating voltage with AC-3 max. nominal value 690 V
• DIN connection (universal for any switchboard on the market)
• No-load switching frequency at AC 10 000 1/h
• Operating current 7 amperes
• 3 poles
• Number of poles per main circuit 3
• Number of NO contacts for main contacts 3
• Number of NO contacts for auxiliary contacts with instantaneous switching 1
• Mechanical life span (switching cycles) of contactor typ. 30.000.000, of the contactor with mounted auxiliary contact block suitable for electronics typ. 5.000.000, of contactor with mounted auxiliary contact block typ. 10.000.000
• Mounting position with vertical mounting surface rotatable by +/-180°, with vertical mounting surface tiltable +/- 22.5° forwards and backwards
• Type of mounting screw and snap-on mounting on 35 mm DIN-rail
• Degree of protection front side IP20
• Height 58 mm
• Width 45 mm
• Depth 73 mm