Presence and motion detector Lince IP44 230V 1348

Ideal for lights and street lamps. Not suitable for security systems.

Motion detector with 180° horizontal coverage angle.  It can drive a load of up to 1,200 W (incandescent lamp) and is powered by 230 Vac.  This device uses a passive infrared that reacts instantaneously to temperature variations between a human body and its surroundings to switch on the light.  After a period of time, of selectable duration, the light is automatically switched off.  A twilight sensor makes it possible to select the light threshold at which to inhibit the switching on of the lamp (load) during daylight hours.

Features:

• Lince Series
• Infrared range: 12 metres
• Ignition time: 5 s to 8 min
• Twilight cell: built-in to deactivate the system in the presence of light
• Adjustment: vertical
• Detection method: Passive infrared 
• Standby current: 30 mA
• Operating current: 35 mA 
• Operating temperature: -25 °C to +50 °C
• Detection angle: 180
• Mounting height: 1.8 ÷ 2 m for wall mounting 
• Automatic stop time: 5 seconds ÷ 8 minutes -
• Twilight sensitivity: 0 ÷ 1,000 lx 
• Stabilisation time: approx. 40 s
• Dimensions: 134 x 86 x 96 mm