Vortice Heater EVO T 0000070152

Other technical characteristics:

• Auxiliary power consumption at minimum heat output - elmin (kW): NO
• Auxiliary power consumption at rated heat output - elmax (kW): NO
• Auxiliary power consumption in standby mode - elSB (kW): NO
• Control with operation time limitation: YES
• Control with remote option YES
• Control with black globe thermometer NO
• Room temperature control with detection of open windows: NO
• Room temperature control with presence detection: NO
• Adaptive start-up control NO
• Seasonal energy efficiency - ?s (%) 37
• Thermal power at two or more manual stages without room temperature control: NO
• Single-stage heat output without room temperature control: NO
• Thermal power with room temperature control by mechanical thermostat: NO
• Thermal power with electronic room temperature control: YES
• Thermal power with electronic room temperature control and daily timer: NO
• Thermal power with electronic room temperature control and weekly timer: NO
  
   

Strengths:

• Casing, top and bottom covers printed in white-colored self-extinguishing polypropylene
• Silver gray PVC decorative band
• Mains connection button (product is in stand-by, ready to turn on) located in the lower portion on the back of the product
• Control panel with LCD display and push-button panel, placed on the upper portion, for: turning on/off the product, activation of automatic oscillation on the horizontal plane, selection of operating modes, LOW: the fan heater constantly operates at minimum power (1,000W), HIGH: the fan heater constantly operates at maximum power (2,000 W)
• AUTO function: allows the setting of the desired room temperature (from 5° C to 32° C): the product will operate automatically to reach the previously set temperature in the shortest possible time, and then keep it constant by alternating cycles of minimum and maximum power operation
• STANDBY function: the product stops its operation but continues to be powered, the timer setting for delayed shutdown, which can be set at ½ hour intervals, up to a maximum of 8 hours
• IR remote control for remote control of the product, powered by a CR2032 3V type lithium battery
• IR remote control signal reception sensor, located in front, immediately above the decorative band
• Ceramic-type electrical heating element (PTC)
• Thermostat for setting and maintaining the desired room temperature
• Thermal protection to prevent damage and risks due to overheating; the product is equipped with a safety device that cuts off the power supply in case of overheating
• Protective device in case the product is tipped over: if the fan heater is accidentally tipped over, a safety switch located inside it immediately stops operation. Once correctly repositioned, the fan heater will automatically reactivate in STANDBY mode
• Polyurethane dust filter, located on the back and protected by the removable grille, useful to protect the internal components from the accumulation of dust and macro particles in the air
• Power cord, 1.5 m in length, complete with shuko plug