Vortice Punto MF wired fan, quiet, compact, UV resistant and equipped with anti-return valve for efficient and safe suction, with the following features:
Power consumption: 14 W
Max absorbed current: 0.08 A
Voltage: 220-240 V
Body: UV-resistant plastic for long service life
Nominal duct diameter: 90 mm
Exhaust diameter: 92 mm
Motor: Thermally protected with self-lubricating supports
Maximum flow rate: 65 m³/h
Politiche per la sicurezza
(modificale nel modulo Rassicurazioni cliente)
Politiche per le spedizioni
(modificale nel modulo Rassicurazioni cliente)
Politiche per i resi
(modificale nel modulo Rassicurazioni cliente)
Helical vacuum cleaner designed for small rooms such as blind bathrooms, laundry rooms, utility rooms or technical rooms. Its long-life motor is thermally protected, while the wing-profile blade impeller ensures effective and constant suction up to 65 m³/h.
Made of aging and sunlight-resistant plastic resin, this wall-mounted vacuum cleaner ensures high durability, even in environments subject to moisture or direct light. The compact design and white finish make it discreet and suitable for any decor.
Thanks to its quiet operation (only 28.8 dB at 3 meters), the Punto MF can also be used in environments where low noise is required, such as bedrooms or offices. The presence of the anti-return valve prevents air backflow, improving hygiene and system efficiency.
This model is controllable via Vortice controller, which allows the operating speed to be modulated as needed, optimizing energy consumption and performance.
| Parameter | Value |
|---|---|
| Nominal duct diameter | 90 mm |
| Exhaust Ø | 92.5 mm |
| Maximum flow rate | 65 m³/h (18 l/s) |
| Maximum pressure | 25 Pa (2.5 mmH₂O) |
| Power consumption | 14 W |
| Max. current consumption | 0,08 A |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| RPM | 2500 |
| Degree of protection | IPX4 |
| Insulation | Class II |
| Max. ambient temperature | 50 °C |
| Sound pressure | 28.8 dB(A) at 3 m |
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent