Automation Kit for 5 Yokis Urmet Rolling Shutters via Radio Power

Technical specifications of KIT components:

5 rolling shutter modules (art MVR500ERP):

Range: 250 meters in unobstructed field of view. Range reduction in the presence of metal elements, crossing walls or bulkheads.

Radio module for controlling roller shutters. Can be driven by an unlimited number of transmitters. Receivers can be interconnected to realize group and centralized commands. Receivers can be mixed, radio and wired, to meet the needs of any type of system. Its built-in torque control prevents damage to the shutter or motor in the event of an obstacle. The module is compatible with all types and brands of rolling shutters with 3-wire motors (Somfy, Aprimatic, Bubendorff, etc...). Built-in daily programming: allows you to configure multiple areas, create scenarios, add a remote control.

Additional information: Use of the Yokis Radio Bus enables centralization of roller shutters via radio. Mixed wired and radio system: the modules have the possibility of dual operation: they can be driven by radio and, at the same time, by wire from local buttons.

Technical features of the rolling shutter modules:

• Line voltage: 230V ~ (+10% - 15%) - 50Hz
• Power: 3-wire motor, 230V~,2A max.500VA
• Ambient temperature: -20°C + 50°C
• Power consumption: < 1VA - < 0.3W
• Relative humidity: 0 to 70%
• Range: 250m in unobstructed field of view. Range reduction in the presence of metal elements, crossing walls or bulkheads
• Frequency: 2.4 GHz
• Transmission: Two-way, with notification LED on the transmitter
• Radio link memory Retains data in case of Network voltage failure
• Dimensions (WxHxD): 33.5 x 48 x 22.5 mm
  
  

1 8-button remote control (art TLC8TP): 8-button remote control compatible with all Yokis Radio receivers. Each button can control up to 4 receivers in direct mode, or an unlimited number, in 'Bus Radio' mode. The LED indicates whether the command transmission was successful. Allows full use of the full functionality of Yokis modules. Also used for direct commands (single or multiple), centralization or scenario activation.

Remote control features:

• Battery: CR2032 type, lithium battery
• Battery life: >7 years. Replacing the battery by opening the product with slotted screwdriver. Data is not lost.
• Range: 250m in unobstructed field of view. Range reduction in the presence of metal elements, crossing walls or bulkheads
• Operating temperature: - 10°C to +50°C
• Relative humidity: 80% maximum
  
  

1 pack of 5 diodes for centralization (art D600V): Accessory to be used for command management in the case of wired centralization: the accessory is to be used for each module involved in centralization, to avoid local commands circulating on the pilot wire.